MAD Heaters The TEMPEST V2 – More Precision. More Power.
The Tempest V2 is here – and it takes everything that made V1 great and cranks it up a notch. Smoother clicks, better heat retention, bigger bowls, and upgraded airflow – this is precision vaping, torch or induction, in a sleek titanium body.
Additional accessories included with the Tempest: Only while supplies last:
- 2 x Retaining Screens (for securing in the heater chamber)
- 3 x Bowl Screens
- 1 x Click Disk
- 1 x Insertion tool for the upper Retaining Screen
- 3 x O-rings (6 × 1 mm)
- 1 x O-ring (8 × 1 mm)
- 1 x Wand Adapter V1
- 1 x Pack of Zirconia Balls (3 mm)
What's new in Tempest V2?
- New 3-position bowl screen (approx. 0.1 – 0.2 g)
- Thicker induction sleeve for better torch performance
- Improved heat distribution = more even extraction
- Twist-to-lock ball screen for added safety
- New green visual indicator on every Cap
- Shorter click-back time with redesigned click discs
Core Features:
- Full extraction in a single heat-up
- Visual & click temperature indicators
- Convection-heavy zirconia ball matrix
- Adjustable bowl size: 0.1 g / 0.15 g / 0.2 g
- Best-in-class airflow & cooling stem
- Adjustable draw resistance & magnet-compatible
- WPA compatible (10 mm, 14 mm, 18 mm)
- Grade 5 titanium with aluminum or titanium heat shield
- Size: 122 mm × 18.5 mm | Weight: Titanium: ~52 g / Aluminum: ~44 g
How to use the Tempest V2:
- Loosely fill the bowl with herbs (around 0.1–0.2 g depending on your preference). Tip: Use the 3-stage screen to set your desired load height.
- Close the Head with the twist-to-lock ball screen – a simple turn locks it in place.
- Heat the Cap evenly with a jet lighter or induction heater (like The Wand) until you hear the click.
- Take a slow, controlled draw. The Tempest V2 responds directly to your airflow – more draw = more convection power.
- After the cool-down click, you can either reheat for another round or finish your session.
Tip: For denser clouds, preheat the cap briefly (1–2 seconds) before starting your full heat-up cycle.
Cleaning & Maintenance:
To keep your Tempest in top form, regular cleaning is key – especially the cooling unit and screen.
- Disassemble the cooling unit and clean it with isopropyl alcohol (91 %+) or warm water.
- The zirconia balls in the Head should stay clean and dry – no need for soaking, just give them a good blowout if needed.
- Check the O-rings from time to time – a small dab of silicone grease keeps them flexible.
Important: Always let the Head cool down fully before taking it apart or storing it – titanium gets very hot!
Pro tips from the community:
-
Click tuning: You can adjust the click response by swapping discs or learning to time your heat cycles manually.
-
Cooler draws? Use the WPA connection (10, 14 or 18 mm) with a water tool for smoother sessions.
-
Ball swaps: Try other heat media like ruby spheres for different retention and flavor profiles.
The Tempest V2 is not a toy – it's a serious tool for vapor connoisseurs. With a bit of practice, you’ll master your perfect sweet spot and repeat it anytime.
Scope of delivery:
More info & user guide available at madheaters.co.uk.
Usage Note:
Back-to-back sessions with the Tempest V2 are totally possible – but they do require some experience due to the large heat reservoir. Once you get the timing right, it’s incredibly satisfying.
Disc Behavior:
Each Tempest disc clicks a little differently – and that’s totally normal. Every unit is individually calibrated. Tip: try dry-testing the click to get a feel for it. Trust the process – it pays off.
Product safety information
Manufacturer information:
MAD Heaters Ltd.
St James House, 65 Mere Green Rd
Sutton Coldfield, Vereinigtes Königreich, B75 5BY
support@madheaters.co.uk
https://madheaters.co.uk/
Responsible person:
VDN Berlin GmbH
Karl-Kunger-Str. 28
Berlin
Berlin, Deutschland, 12435
shop@verdampftnochmal.de
https://verdampftnochmal.de
