EZ Sai Kit
The Saionara oil attachment features switchable coils and 510 threading for compatibility with nearly every box mod and concentrate!
The Saionara Atomizer is made entirely of stainless steel for maximum durability and a refined look. The upper part has an integrated splash guard for protection against oil spills and the mouthpiece is completely removable. The base of the unit revolves to adjust the airflow between more draw resistance and thicker clouds, or less resistance for it but softer inhalation. The Saionara has a 510 thread that is compatible with almost every sub-ohm box module and the entire Sai Atomizer needs less than 25 watts to function.
In TC mode you have to log the resistance of your Boxmod, because the resistance can fluctuate and the device can not maintain the correct temperature. If you want to use TC mode, make sure your battery mod is able to do that.
EZ Sai Kit:
We offer you here a complete Kit. You only need to specify the desired level for this battery carrier. The rest is done by the device. The battery carrier has 1050 mah and fits the Saionara or other atomizers with 21mm diameter. It can be operated in both Watt and TC Ti modes. In Watt mode, the battery runs at 25W. In TC Ti mode, it can be switched between 193°C / 215°C / 238°C.
The battery is turned on/off with 5 clicks. With 3 clicks you can switch through the 4 levels. A led indicates the change. While charging, the fire button flashes with a dim LED. When connecting the battery, the stages light up 3 times briefly.
- Battery included
- Durable Stainless Steel Build
- Use with concentrates
- Wattage & Temperature Modes
- Resistance: 0.5 ~ 0.7 Ohm
- Wattage: 25 Watt
- Volt: 3.8 ~ 4.8 Volt
- Adjustable airflow
- 510 Threaded
- Splash Guard Top Section
- Removable Mouthpiece
- Easy to Clean
- 21mm Diameter
Operation of the Sai Atomizer:
First, you should choose your wattage. We recommend starting with about 15 watts and then slowly working up to your sweetspot. The socket must be screwed into the 510 port of your boxmod. Before the first use, the Saionara should be heated a few times in vacant condition. Then a small amount of concentrate can be added to the coil bucket. By pressing the fire button a few times, the concentrate melts and can be inhaled. The Airflow can be customized according to your liking. More draw resistance gives stronger clouds, less raw resistance provides a pleasant vapor experience. With the exception of the O-rings, all Sai parts can be soaked in isopropyl alcohol for easier cleaning and maintenance
What is in the box?
- 1 x Saionara Atomizer
- 1 x EZ Battery (choose color above)
- 1 x Replacement coil w/ titanium bucket
- 1 x Dabbing Tool
- 2 x Replacement O-Rings
- 1 x Quick Start Manual
Please note: Atomizer are wear parts and can be replaced as needed. Spare Parts for the Saionara can be found here.