CrossingTech Thermal Twist Injector Titanium
The Thermal Twist Ball-less Injector was developed by Recvapes in collaboration with CrossingTech and offers strong performance with simple operation at an unbeatable price. The Injector is therefore a real competitor to the usually much more expensive ball vapes that are currently popping up like mushrooms in a forest.
As the Thermal Twist Injector does not require balls, the sometimes time-consuming handling of these is eliminated and operation is made much easier. The injector offers you a vortex airflow that saves you stirring of your herbs. Similar to the Arizer XQ2, the circulating airflow swirls the herbs through the chamber independently. You can vaporize even the smallest amounts (we have successfully tested the Thermal Twist with up to 0.05g) without any problems.
Designed with simplified ease of use in mind, the Thermal Twist comes with a pre-installed handle on the heating coil, allowing for a plug & play experience without the risk of spilling balls (as there are none) or installing the handle incorrectly during the assembly process! Plug the heater into the front of the PID, the power adapter/plug into the back, turn it on, set the temperature and it's ready to go (we recommend doing an initial "burn off" cycle!). The stand has been designed to have minimal contact with the body of the injector, so the heat stays where it belongs, in the injector itself, and is not transferred into the stand or worse, the surface below!
Usage notes
- If you want to use the 14.4mm bowl with the Keck clip and the 18.8mm adapter together, turn the bowl slightly on the adapter when inserting it so that both joints connect nicely with each other before attaching the Keck clip. This will prevent the joints from rotating unintentionally during use.
- We recommend that you do not leave the Thermal Twist Injector on the glass bowl after use, but instead place it on the stand, which was developed precisely for this purpose.
- You can use the SideCarp adapter to empty the vapor from your water piece. This means that your herbs are not compressed any further and the vapor is easier to empty and does not itch as much as if you draw the air through the bowl to empty it.
- The heat guard extends slightly beyond the injector, which should help you to align the injector more easily on the bowl. Anyone who knows injector vapes knows that it can be tricky, especially after a few uses, to align the injector so that it sits flush on the bowl.
The Thermal Twist Injector can provide you with the finest terpy hits at low temperatures, but can also produce thick, exceptionally smooth vapor. We recommend setting the PiD controller to a temperature between 280 - 390 °C (526 - 734 °F). However, it makes perfect sense to try this out for yourself. For an InDepth look and further information, take a look at the Video by Lee (TableTop Bong).
The kit comes with everything you need to start having fun right away, except a Water Piece and of course without your herbs.
🔧 Thermal Twist – PiD Controller Quick Guide
| 📍 |
Default temperature setting: Celsius (UK/EU/AU) |
| ⏻ |
Power On/Off: Hold the center button for 5 seconds. |
| 🌡️ |
Adjust Temperature: Use the ± buttons. |
| ⏰ |
Auto-Off Timer: Press the center button five times, adjust 0–5 hours with ± buttons. |
| 🌍 |
Switch Between Celsius/Fahrenheit: While off, hold the + button for 5 seconds, then press + again to toggle. |
Scope of delivery:
- 1 x Thermal Twist Injector (Gr2 Titanium)
- 1 x CrossingTech Micro PiD (1c/1f) (CE/ROHS certified)
- 1 x 20 mm heating coil with silicone handle pre-installed (220 V)
- 1 x Pre-installed heat protection for the Thermal Twist Injector
- 1 x 14.4 male glass bowl with side-carb (approx. 0.4g max. capacity)
- 1 x Adapter from 14.4 mm to 18.8 mm male thread
- 1 x Keck clip
- 1 x steel stand
- 1 x Scoop
- 1 x cleaning brush
- Stainless steel screens
- 1 x EU cable
- 1 x instruction manual in English
Our conclusion:
The Thermal Twist Injector Vaporizer ushers in a new era of desktop vaporizers for german connaisseurs. Such devices have been rather rare so far, because it has a similar performance to the ball vapes that currently everyone is talking about, but at a significantly lower price. You can use it with almost all typical water pieces. It can produce massive clouds or soft vapor, just as you like it. Simple operation and cleaning are further plus points. We are delighted to be able to offer you this great device and hope that you enjoy it as much as we do.
Product safety information
Manufacturer information:
Shenzhen Crossing Technology Co.,Ltd.
No.7 Tongfu Road
Guangdong
Shenzhen, China, 518103
paul@szcrossing.com
http://www.szcrossing.com/
Responsible person:
VDN Berlin GmbH
Karl-Kunger-Str. 28
Berlin
Berlin, Deutschland, 12435
shop@verdampftnochmal.de
https://verdampftnochmal.de
