Tornado TXL Bowl
The TXL Bowl from Vestratto offers a 55% larger capacity than the standard ThermoCore CopperCore XL Bowl known from the Anvil. With a medium grind, it holds close to 0.3 g of herb, depending on the material used.
It features a hexagonal grip for easy insertion and removal. Important: The TXL Bowl is not compatible with the Cold Start method (preheating the oven and inserting a cold bowl), as this can result in thermal locking.
Manufacturer recommends: Insert the bowl into an unheated Tornado oven and back off by 1/16th turn to prevent thread binding during heat expansion.
Highlights:
- 55% larger than ThermoCore CopperCore XL Bowl
- Capacity: up to approx. 0.3 g (medium grind)
- Hexagonal grip for easy handling
- Best results with a loose pack
Scope of delivery:
Important note on using the TXL Bowl
To prevent the TXL Bowl from binding inside the Vestratto Tornado, the bowl and tip should always be assembled while both parts are cold. A cold start with both parts cold works without any issue. The critical situation is the combination of a cold bowl and a warm or still hot Tornado tip.
Do not insert a cold bowl into an already warm or hot Tornado tip and do not tighten it all the way down until it bottoms out. The reason is simple: copper and stainless steel expand and contract differently when heated and cooled. If a cold bowl is inserted into a hot tip and tightened completely, the bowl may bind as the tip cools down. When the bowl and Tornado heat up and cool down together, this issue usually does not occur.
Recommended use:
Screw the bowl in by hand while everything is cold, then back it off slightly, about 5 degrees. Make sure the airflow holes remain open and that the bowl is not sitting against the bottom of the heating chamber. After use, allow both the Tornado and the bowl to cool down completely before loosening or changing the bowl. This usually takes around 5 minutes.
Tip: To help the Tornado cool down faster, place it on a heat-resistant metal surface, such as a grinder. Do not force the bowl loose while the parts are still hot.
Product safety information
Manufacturer information:
Vestratto
Siehe Verantwortliche Person
, ,
info@vestratto.com
https://vestratto.com/
Responsible person:
VDN Berlin GmbH
Karl-Kunger-Str. 28
Berlin
Berlin, Deutschland, 12435
shop@verdampftnochmal.de
https://verdampftnochmal.de
There are no reviews yet.
