Dreamwood Glow RCV 14 Classic (Rebuildable Convection Vaporizer)

Description
Ratings

Dreamwood Glow RCV 14 Classic

A warm welcome to the Dreamwood RCV Box-Mod Vaporizer Attachment. The RCV stands for "Rebuildable Convection Vaporizer". For really tasty vapor you only need a Box-Mod with a standard thread like the iStick Pico with a power of at least 50Watt.

Before first use of the Glow RCV:

screw the Glow vaporizer onto your battery mod.

Set Wattage to 40-45.

Pull the mouthpiece out of the upper part.

Press the fire button on the battery until the heating wires glow.

Puff in briefly to cool and repeat.

The heating wires must glow evenly!

Otherwise the heating wires must be aligned, for this purpose the upper part must be removed from the base. Important: Switch off the battery carrier beforehand and never touch the heating wire when the battery carrier is switched on! When removing the upper part, wiggle slightly and turn, then check the heating wires. These must be firmly screwed together and must not touch anything other than the screw connection points on the + and - pole. Align the heating wires, if necessary, and then fasten them. Switch on the battery carrier and let the heating wires glow briefly at 40 watts to check whether they are now glowing evenly. Switch off the battery carrier again and carefully place the upper part on top.

You can treat the inner edge of the top with some wood wax to assemble the parts without damaging the O-rings.

In this version, the herb chamber is located in the lower base attachment when the wooden mouthpiece is used and is filled from above. The herb chamber is in the mouthpiece only when using the glass mouthpiece with extra O-ring.