Cuboo Induction Heater for VapCaps
Cuboo is the new one at VaporizedOnce Again. It's an induction heater for your favorite VapCap. Just plug it in, wait for the click and start vaping.
The operation is intuitive and easy to learn. The Cuboo is turned on and off with 5 clicks. Insert the Dynavap into the Cuboo with the cap facing down. The device will detect the vaporizer and start heating up (you don't have to use pressure!). The red LED will light up during the heating process. When the VapCao has clicked, you can start inhaling. The LED is now green again and the device is ready for use. The Cuboo will turn off after 16 seconds of heating.
The Cuboo is equipped with a strong magnet. Here you can finally put down your VapCaps safely :). The Cuboo makes a very quiet tick noise during use. This is the sensor that checks if a VapCap has been inserted and is completely normal.
Features of the Cuboo at a glance:
- 1000mAh battery capacity
- Housing made of aluminum
- Firm stand due to 4 nubs on the bottom
- Only 280 grams light
- Strong magnet on the front
- About 2 hours to fully charged
- VapCap detection Sensor
The Cuboo should only be charged with the included USB-C cable and the 3.0 power supply. The LED will flash red while charging and when the battery is charged it will be steady red.
The battery has a capacity of 1000mAh, which is equivalent to about 30-50 clicks.
Size and Weight:
- 11 x 7 x 3 cm
- 280 grams
Just when heating up for the first time comes very little vapour, so we recommend quietly heat something above the click, you will quickly get a feel for it. The LED display can also be used to find out the right time for you, especially in the beginning. Simply count the flashing.
Who this is still too little steam, you can still improve the power a bit with the included glass piece and the two silicone plates. To do this, you need to remove the 4 black stand knobs on the bottom of the device to get to the 4 allen screws. After unscrewing, you will see the contents and the heating coil with the red O-ring. You can simply pull out the glass and replace it with the supplied glass.
Important: The silicone plates let you in the new glass tube, so that they close below. If you use only one silicone plate, then the heating is the fastest and strongest. We recommend to use both plates.
In this video from Vapefiend shows the process. Don't worry, it's very simple.
Scope of delivery:
- 1 x Cuboo induction heater
- 1 x glass part + 2 silicone plates
- 1 x Qualcom power adapter
- 1 x USB-C cable
- 1 x German manual
The Cuboo is the perfect addition to any VapCap and a must have for true fans. Easy operation, USB-C, and a compartment for storage absolutely speak for themselves.With the ability to tune the heating process, the Cuboo is suitable for any DynaVapian. Warranty and guarantee uncomplicated about vaporizedagain! Clear buy recommendation.
|Product weight:||0,28 Kg|