The Cuboo Heater, Jazz Vaporizer and jet lighter Bundle!
DynaVap Jazz Vaporizer complete
Here you get a complete set. It includes a Jazz Stem made of glass, a standard cap and a tip from 2019. The set is our cheapest DynaVap. All you need is the cuboo heater or the jet lighter and good herbs and you can start right away.
Scope of delivery for the Jazz Vaporizer:
- 1 x Jazz Stem
- 1 x standard cap
- 1 x tip from 2019
Cuboo V2 Induction Heater for VapCaps
Cuboo V2 is the new one at Verdampftnochmal. It's an induction heater for your favorite VapCap. Just plug it in, wait for the click and start vaping. The Cuboo has an automatic shut-off after about 16 seconds. This is a safety feature in case the VapCap should be forgotten in the induction heater while heating.
The Cuboo V2 is equipped with a strong magnet. Here you can finally put down your VapCaps safely :). The Cuboo makes a very quiet tick noise during use. This is the sensor that checks if a VapCap has been inserted and is completely normal.
Features of the Cuboo at a glance:
- 1000mAh battery capacity
- USB-C
- Housing made of aluminum
- Firm stand due to 4 nubs on the bottom
- Only 280 grams light
- Strong magnet on the front
- VapCap detection Sensor
Charging:
The Cuboo V2 should only be charged with the included USB-C cable and the 3.0 power supply. After pressing the button once, the Cuboo will show you the battery status: 1 x blue flash = 70 - 100% 2 x blue flash = 30 - 70% 3 x blue flash = please charge
Battery Power:
The battery has a capacity of 1000mAh, which is equivalent to about 30-50 clicks.
Size and Weight:
- 11 x 7 x 3 cm
- 280 grams
Tip 1:
Just when heating up for the first time comes very little vapour, so we recommend quietly heat something above the click, you will quickly get a feel for it. The LED display can also be used to find out the right time for you, especially in the beginning. Simply count the flashing.
Tip 2:
Who this is still too little steam, you can still improve the power a bit with the included glass piece and the two silicone plates. To do this, you need to remove the 4 black stand knobs on the bottom of the device to get to the 4 allen screws. After unscrewing, you will see the contents and the heating coil with the red O-ring. You can simply pull out the glass and replace it with the supplied glass.
Important: The silicone plates let you in the new glass tube, so that they close below. If you use only one silicone plate, then the heating is the fastest and strongest. We recommend using at least 3 plates if you modifie it. Caution: Burning may occur with 1 or 2 plates!
In this video from Vapefiend shows the process. Don't worry, it's very simple.
Scope of delivery:
- 1 x Cuboo V2 induction heater
- 2 x glass parts + silicone plates
- 1 x Qualcom power adapter
- 1 x USB-C cable
- 1 x German manual
Our conclusion:
The Cuboo V2 is the perfect addition to any VapCap and a must have for true fans. Easy operation, USB-C, and a compartment for storage absolutely speak for themselves.With the ability to tune the heating process, the Cuboo is suitable for any DynaVapian. Warranty and guarantee uncomplicated with us! Clear buy recommendation.
Product weight: | 0,34 Kg |